Products

Drying cabinet with timer function operated with two knobs to set the power and drying time. The cabinet is robust and has three hangers, two of which are extendable and collapsible. It also has three door hangers.
The cabinet is ventilated through a pin on the top, and when the cabinet is on, about 95 m³ of humid air is evacuated per hour so make sure that air can enter the room to replace the moist air being vented.

• Reversible door hanging
• Robust construction
• Domestic execution

The model can operate either in High Productivity mode or in Sanitation mode and has three wash cycles - for lightly, normal or heavily soiled dishes. Built-in atmospheric boiler sized to raise incoming water to a minimum of 84 °C for sanitising rinse. Unique temperature interlock guarantees required temperatures in both the wash and final rinse. Built-in rinse aid dispenser with automatic initial and continuous cycle loading for the perfect result while minimising service and maintenance needs. Slanted wash arms to avoid detergent-filled wash water dripping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results. The model has an automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation. For connection to hot water 80 baskets/hour capacity Single Skin Hood Low water and detergent consumption Electronic system control Built-in atmospheric boiler Automatic self-cleaning cycle Installation for straight or corner flow installation

This pre-wash module is to be installed with the Electrolux green&clean dual rinse rack type dishwasher. This model features an insulated door and CLEAR BLUE water filtering system. The filter system removes the majority of soil from the wash water to ensure clean water for a long time. Built-in drain valve in the tank allows automatic dump and fill to refresh the water in the tank without interruption. The pre-wash section uses only cold water, so food remains are not "baked" onto the plates to have better pre-wash performance. The heating elements only get activated during the sanitation cycle. The tank has a volume of 35 L, and the wash pump has a power of 0,37kW. Insulated door CLEAR BLUE filter system

A small Marine Glasswasher for racks with dimension of 400x400 mm. It has stainless steel front and side panels, wash tank, tank filter and wash and rinse arms. Solid double skinned counter-balance door with hurt-free handle fully in stainless steel. The built-in pressure boiler designed to raise incoming water to a guaranteed minimum temperature of 82°C for sanitizing rinse. No external boiler is required. Washing system has rotating washing arms from both top and bottom, high powered wash pump and large capacity wash tank to guarantee professional washing. Electronic control panel for easy setup of the working parameters and self diagnosis. Easy service access to main components without moving the unit. Extra program to cold rinse beer and wine glasses providing sanitized glasses, cool enough to handle. Equipped with water softener to ensure optimal rinsing results. Built in rinse booster pump allows to connect to low water pressure. Incorporated Soft Start feature to offer additional protection to more delicate items. 120/300/120 seconds cycle, the third cycle includes cold rinse. For racks with the dimension of 400x400 mm. Maximum capacity of 30 racks per hour. With drain pump. Electronic control panel.

The new generation green&clean undercounter dishwashers are modern solutions designed for bars, cafès and small restaurants onboard. They are dedicated to customers that highly consider design and savings without compromising performance. The dishwasher features low consumption in energy, water, detergent and rinse aid and the fully insulated double skin construction means less heat emission. The models excellent washing and rinsing performance are obtained by the double upper and lower washing and rinsing arms. The machines Wash-Safe Control function guarantees a hygienic result with a constant nominal rinsing temperature of 84°C. A fully automatic self-cleaning cycle avoids the risk of bacteria proliferation. The machine is easy to use and keep constant monitoring, thanks to the visible temperature display. The display allows on-site personalization of washing and rinsing cycle times and temperatures and precise rinse aid and detergent quantities to suit your needs. The unit has a safe and ergonomic counter-balanced door for soft opening and closing. There is no need to move the machine to perform maintenance thanks to the removable front panel. Atmospheric boiler Rinse water consumption only 2,5 litres/cycle Soft Start feature to offer additional protection to delicate items Double skinned insulated Low noise level Simple service from the front IPX4 water protection Pre-arrangement for HACCP

The new generation green&clean undercounter dishwashers are modern solutions designed for bars, cafès and small restaurants onboard. They are dedicated to customers that highly consider design and savings without compromising performance. The dishwasher features low consumption in energy, water, detergent and rinse aid and the fully insulated double skin construction means less heat emission. The models excellent washing and rinsing performance are obtained by the double upper and lower washing and rinsing arms. Built-in pressure boiler sized to raise incoming 50°C water to guarantee a minimum rinsing temperature of 82 °C for sanitizing rinse. A fully automatic self-cleaning cycle avoids the risk of bacteria proliferation. The machine is easy to use and keep constant monitoring, thanks to the visible temperature display. The display allows on-site personalization of washing and rinsing cycle times and temperatures and precise rinse aid and detergent quantities to suit your needs. The unit has a safe and ergonomic counter-balanced door for soft opening and closing. There is no need to move the machine to perform maintenance thanks to the removable front panel. Pressure boiler Rinse water consumption only 2,5 litres/cycle Soft Start feature to offer additional protection to delicate items Double skinned insulated Low noise level Simple service from the front IPX4 water protection Pre-arrangement for HACCP

An undercounter dishwasher with safe control, detergent dispenser and drain pump. The unit has a built-in atmospheric boiler sized to raise incoming 50 °C water to 84 °C minimum for sanitizing rinse. No external booster is required. A constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure and temperature. The green light of "Wash safe control" confirms that items have been rinsed properly. High-efficiency air gap (class A) in water inlet circuit to avoid water being syphoned back into the network as a result of a sudden drop in main pressures. An effective rinse system uses only 3 litres of clean hot water per basket for lower running costs. The cycle time is 90/180 seconds and the washing capacity is up to 40 baskets/h. Digital read-out keeps the operator informed as to temperatures. State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle. High capacity Double skinned construction Easy cleaning Three wash programmes Superb dishwashing result Low water and detergent consumption Fully automatic Easy installation and service Detergent, rinse aid and drain pump Built to comply with USPH

This dishwasher LDW50 is made of stainless steel 18/8 304 and is made for continuous operation. It is easy to use and simple to clean. The dishwasher has automatic filling, tank thermometer, pressure hose 3/4”, drain hose and thermal protection for boiler and tank, rinse aid value, D.V.G.W value. Detergent pump included in delivery Door opening height 36 cm Double skin door Stainless steel wash and rinse system Stainless steel tank AISI/304 mm Waterproof IP44 pump. Standard break tank valve. Standard boiler thermometer. With detergent pump.

This dishwasher LDW60 is made of stainless steel 18/8 304 and is made for continuous operation. It is easy to use and simple to clean. The dishwasher has automatic filling, tank thermometer, pressure hose 3/4”, drain hose and thermal protection for boiler and tank, rinse aid value, D.V.G.W value. Door opening height 36 cm Double skin door Stainless steel wash and rinse system Stainless steel tank AISI/304 mm Waterproof IP 44 pump Standard break tank valve Standard boiler thermometer With detergent, drain pump is optional

Pre-rinse unit in a robust stainless steel design for use in a professional working environment. It has a single lever mixer tap with a premium swivel spout (360°) with a 220 mm projection. A non-return valve prevents the circulation between hot and cold water and the backflow of dirty water. The pre-rinse features an automated pull mechanism that opens the water valve when the hand shower is pulled down and closes when released (supported by a gas pressure spring). The ergonomic metal spray head has a plastic strainer with integrated closing delay for reduced pressure surges. High performance automated pull mechanism For high pressure only Ceramic headworks (mixer), Ceramic headworks (spout) Heat insulating handles Stainless steel spring High-performance Aggraff-hose, 1000 mm Hot water-resistant up to 80°C

Pre-rinse unit in a robust stainless steel design for use in a professional working environment. It has a two-handle mixer tap with a premium swivel spout (360°) with a 220 mm projection. The model features an ergonomic metal spray head, plastic strainer with integrated closing delay for reduced pressure surges. Non-return valves prevent the circulation between hot and cold water as well as the backflow of dirty water. For high pressure only Ceramic headworks (mixer), Ceramic headworks (spout) Heat insulating handles Stainless steel spring High-performance Aggraff-hose, 1000 mm Hot water-resistant up to 80°C

The dryer is built on modularity concept to easily connect with Electrolux dual rinse rack type dishwasher without any modification including power, inlet water, drain water, detergent and rinse aid connections. It is to be placed between the dual rinse rack type dishwasher and the handling system. Drying zone removes most of the water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely. The feeding direction can be either left to right or right to left as it's reversible on site. IPX5 On site reversible feeding direction

The dryer is built on modularity concept to easily connect with Electrolux dual rinse rack type dishwasher without any modification including power, inlet water, drain water, detergent and rinse aid connections. The unit is to be placed between the dual rinse rack type dishwasher and the handling system. The feeding direction can be either left to right or right to left as it's reversible on site. Drying zone removes most of the water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely. The dryer features a large counterbalanced inspection door that allows unrestricted all-round access to the internal area. The injected foam insulation in the door adds strength and reduces noise and heat loss. Four adjustable marine feet allows full access underneath the machine for easy cleaning. IPX5 On-site reversible feeding direction

The dryer is built on the modularity concept to easily connect with Electrolux dual rinse rack type dishwasher without modification. Install it together with a 90° or 180° dishwasher driven curve. The corner dryer removes most of the water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely. The hygienic design facilitates cleaning and offers full access to the interior of the tunnel. The feeding direction can be either left to right or right to left as it's reversible on site. IPX5 On-site reversible feeding direction

This hood type dishwasher is a compact, double skin tank machine with a large capacity of up to 80 baskets per hour. The machine requires only 2 litres of water per washing cycle thus ensuring low energy, water, detergent and rinse aid consumption. Main inside components, as well as the outside panels, are made in AISI 304 stainless steel with smooth surfaces for easy cleaning. Built-in atmospheric boiler sized to raise incoming water to a minimum of 84 °C for sanitizing rinse. Built-in drain pump and built-in rinse aid dispenser with automatic initial and continuous cycle loading for a perfect result while minimizing service and maintenance needs. State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle. CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs. Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation. The model is provided with sound and heat insulation and intended for connection to hot water. Heavy duty stainless steel 304 construction IP25 protection Drain pump and rinse aid dispenser pump 80 baskets/hour capacity Double skin hood (insulated) Low water and detergent consumption Built-in atmospheric boiler Automatic cleaning cycle Built to comply with USPH

The Pot and Pan washer is designed for washing containers, baking plates, trays, pots and pans, casseroles, storage boxes and cooking utensils. The front and side panel, wash tank, filters and wash and rinse arms are manufactured in 304 AISI stainless steel. Additional 3-sided wash arm provides more powerful wash water for the best cleaning of soiled items. The Pot and Pan washer has 4 washing cycles of 180-360-540 seconds and continuous for different level of soiled items. The machine is also provided with fault autodiagnosis system and prearrangements for automatic detergent dispenser, HACCP system implementation and Energy Management device. The construction of the machine includes atmospheric boiler combined with the rinse booster pump for perfect rinsing performances. Also a built-in drain pump, rinse aid and detergent dispense. Easier access to the washing chamber thanks to the 180° frontal opening door. Double skin insulated door for less heat and noise dispersion. Electronic board with digital display. High efficiency air gap (class A) in water inlet. Simple control panel. Easy removable wash- and rinse arms, pump and tank filters. Smooth surfaces and a tank with rounded corners for simplify cleaning. Fully automatic self-cleaning cycle. 97% recyclable by weight

Combination includes • 535126 - Dual Rinse Rack Type Dishwasher 150r/h R-L • 865498 - Splash Hood Kit of 200 mm • 865510 - ESD Kit Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH All electric components are put in one IP65 central box, overall IP25 Reversible feeding direction (factory default is R-L)

Combination includes • 535126 - Dual Rinse Rack Type Dishwasher 150r/h R-L • 535130 - Medium Pre-Wash Module, Dual Rinse, Reversible • 865506 - Electronic Board Kit for Dual Rinse Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH All electric components are put in one IP65 central box, overall IP25 Reversible feeding direction (factory default is R-L)

Combination includes • 535126 - Dual Rinse Rack Type Dishwasher 150r/h R-L • 535130 - Medium Pre-Wash Module, Dual Rinse, Reversible • 865506 - Electronic Board Kit for Dual Rinse • 865510 - ESD Kit for Dual Rinse • 865498 - Splash hood Kit of 200 mm • 865509 - Extended Pipe Kit for ESD, Dual Rinse Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH Reversible feeding direction (factory default is R-L)

Combination includes • 535127 - Dual Rinse Rack Type Dishwasher 150r/h R-L • 865498 - Splash Hood Kit of 200 mm • 865510 - ESD Kit Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH All electric components are put in one IP65 central box, overall IP25 Reversible feeding direction (factory default is R-L)

Combination includes • 535127 - Dual Rinse Rack Type Dishwasher 150r/h R-L • 535131 - Medium Pre-Wash Module, Dual Rinse, Reversible • 865506 - Electronic Board Kit for Dual Rinse Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH All electric components are put in one IP65 central box, overall IP25 Reversible feeding direction (factory default is R-L)

Combination includes • 535127 - Dual Rinse Rack Type Dishwasher 150r/h R-L • 535131 - Medium Pre-Wash Module, Dual Rinse, Reversible • 865506 - Electronic Board Kit for Dual Rinse • 865510 - ESD Kit for Dual Rinse • 865498 - Splash hood Kit of 200 mm • 865509 - Extended Pipe Kit for ESD, Dual Rinse Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH All electric components are put in one IP65 central box, overall IP25 Reversible feeding direction (factory default is R-L)

Rack type dishwasher with dual rinse technology that ensures rinse water covering every corner of the rack for perfect hygiene on washed wares. The unit features a stabilized pressure valve that guarantees a rinse water consumption of 1.2 litres/rack regardless of inlet water pressure. The dishwasher is a made on modularity concept for easy to add pre-wash and dryer modules on-site. External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit. The feeding direction is right to left as pre-arrangement from the factory but is easily reversible on-site. The model is designed for marine application as components is easily accessible from the front for service and maintenance without removing the machine. The dishwasher has an automatic drain, clean and sanitize cycles as standard features. The internal chamber is thoroughly cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for the operator. An auto-start/stop in different zones ensures that the zone runs only when a rack is passing through it. With the intuitive touch-screen control panel, the user can easily operate and monitor the machine status. And an automatic back-up mode is activated if a failure occurs with guided troubleshooting for fast fixes. There are no internal pipes in the chamber, and a deep-drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage. Low water consumption of only 1.2 l/rack Easy to add pre-wash and dryer modules on-site Components accessible from the front Automatic back-up mode if a failure occurs In compliance with USPH All electric components are put in one IP65 central box, overall IP25 Reversible feeding direction (factory default is R-L)

Wall-mounted pre-rinse unit in a robust stainless steel design for use in a professional working environment. It has a two-handle mixer tap with a premium swivel spout (360°) with a 270 mm projection. The model features an ergonomic metal spray head, plastic strainer with integrated closing delay for reduced pressure surges. Non-return valves prevent the circulation between hot and cold water as well as the backflow of dirty water. Wall-mounted For high pressure only Ceramic headworks (mixer), Ceramic headworks (spout) Heat insulating handles Stainless steel spring High-performance Aggraff-hose, 1000 mm Hot water-resistant up to 80°C

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Two Sizes

Smooth cooking griddle with a surface in brushed chrome that is highly resistant to scratches and facilitates cleaning operations at the end of the day. The top can be mounted on open base cupboards, bridging supports or cantilever systems. A large drain hole on cooking surface permits the draining of fat into large collector placed under the cooking surface. The model has electric elements in incoloy positioned under the cooking plate. The design of the control knob system guarantees against water infiltration, and the temperature can be set from 120° up to 280°C. The griddle has high stainless steel splash guards on the rear and sides of cooking surface. These splash guards can be easily removed for cleaning and are dishwasher-safe. Note: handrail is available as an optional extra. Smooth cooking plate Cooking surface 330x700mm High level of performance and fast heat up time Safety thermostat and thermostatic control Large drain hole for fat and grease

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

BASIC INFORMATION PRODUCT BRAND Electrolux Professional INSTALLATION, TYPE Top model ELECTRIC DATA VOLTAGE (V) 230 PHASE 3 FREQUENCY (HZ) 50/60 DIMENSIONS WIDTH, NET (MM) 400 DEPTH, NET (MM) 730 HEIGHT, NET (MM) 250

The Dito Electrolux Libero Line offers a complete package of plug-in appliances suitable for every food service location to cook, fry, grill and chill all kinds of dishes in a quick and easy way. In a very compact space with this versatile griddle you can grill meat, fish, vegetables and more. Heavy-duty, one-piece seamless, 304 AISI stainless steel construction. Sealed stainless steel cooking surface, 10 mm in thick Frying plate with non-stick chromium surface. Digital temperature display and touch button control panel. Integrated drain and grease collector with extractable drawer IP24 protected. Cord and plug included. Four adjustable feet. Tabletop design, front-to-back

The Dito Electrolux Libero Line offers a complete package of plug-in appliances suitable for every food service location to cook, fry, grill and chill all kinds of dishes in a quick and easy way. In a very compact space with this versatile griddle you can grill meat, fish, vegetables and more. Heavy-duty, one-piece seamless, 304 AISI stainless steel construction. Sealed stainless steel cooking surface, 10 mm in thick Frying plate with non-stick chromium surface. Digital temperature display and touch button control panel. Integrated drain and grease collector with extractable drawer IP24 protected. Cord and plug included. Four adjustable feet. Tabletop design, side by side model.

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

This griddle in the 900XP range is designed to guarantee the highest level of performance, reliability, energy-saving, safety standards and ergonomic operation. The cooking surface is 1/3 ribbed and 2/3 smooth brushed chrome that is highly resistant to scratches and facilitates cleaning at the end of the day. A large drain hole on cooking surface permits the draining of fat into large collector placed under the cooking surface. The model is to be mounted on open base cupboards, bridging supports or cantilever systems. The griddle has electric elements in incoloy positioned under the cooking plate. It features separate controls for each half module of the cooking surface, a safety thermostat and thermostatic control. The design of the control knob system guarantees against water infiltration. The temperature can be set from 120° up to 280°C. A high stainless steel splash guards on the rear and sides of cooking surface that can be easily removed for cleaning and are dishwasher-safe. Note: handrail is available as an optional extra. Smooth/ribbed cooking plate High level of performance and fast heat up time Safety thermostat and thermostatic control The unit is 930 mm deep to give a large working surface area Large drain hole for fat and grease Adjustable marine feet (50 mm)

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

Smooth cooking griddle with a surface in brushed chrome that is highly resistant to scratches and facilitates cleaning operations at the end of the day. The top is to be mounted on open base cupboards, bridging supports or cantilever systems. A large drain hole on cooking surface permits the draining of fat into large collector placed under the cooking surface. The model has electric elements in incoloy positioned under the cooking plate. It features separate controls for each half module of the cooking surface, a safety thermostat and thermostatic control. The design of the control knob system guarantees against water infiltration and the temperature can be set from 120° up to 280°C. The griddle has high stainless steel splash guards on the rear and sides of cooking surface. These splash guards can be easily removed for cleaning and are dishwasher-safe. Note: handrail is available as an optional extra. Smooth cooking plate High level of performance and fast heat up time Safety thermostat and thermostatic control Large drain hole for fat and grease

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

The fry dump is made of stainless steel. The cook-top has raised edges on three sides to collect any spillage. The front panel has clear and easily accessible controls. The heating element is positioned under the fry dump basin, and the unit can be fitted with a heat-keeping ramp with a direct radiating, infrared element for effective warming. The sides of the fry dump are smooth and easy-to-clean. The fry dump is connected to the mains supply at the rear. It can be positioned with the back directly against a fireproof bulkhead. A stainless steel floor cabinet with doors and drawers is available as an optional extra. The cabinet is provided with adjustable legs and can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. Stainless steel Thermostat controlled Hygienic design Good hot keeping

The salamander is made entirely of stainless steel, including grill rack and heaters. The element assembly can be raised or lowered from outside in five steps for setting in the right level. The interior offers sufficient space for GN1/1 items and is equipped with two separately controllable radiant heaters. The salamander is supplied with a grill rack provided with two well-insulated handles. A carefully designed exterior and interior without any troublesome corners and edges facilitate cleaning and maintenance. A supporting wall bracket for wall mounting is available as optional extra. For further specifications and optional extras, please see overleaf. Stainless steel Stainless steel Accepting GN1/1 item Two separately controlled heating zones Tabletop model Energy saving Easy, flexible installation Easy to clean Small space need

Pro Thermetic Tilting Boiling Pan. Depth=900 mm and Height=900 mm incl. marine feet. Stirring device is optional extra.

MFEX fryer manufactured to comply with SOLAS 2009 regulations and tested according to ISO standard 15371:2009. The model contains an electric deep fryer and Ansul R-102 wet chemical extinguishing system, integrated by a SUS304 casing. An exhaust blower is included which can be installed under a standard cooking exhaust hood, or directly connected to the main ventilation duct. The unique external-power cutoff design and external-powered remote alarm panel enhance electrical safety in case of a fire. High power density, quick temperature recovery for desired frying quality Submerged heating brings optimal energy transfer With deep cold-oil zone, enables extended shortening life Balanced load among three phases Protection grade IP44 Complying with SOLAS and ISO15731 test standard Automatic and manual release. A remote release is available An environment-friendly extinguishing agent with long preservation life

The deep fat fryers are made of stainless steel. The top has raised edges on three sides to collect any spillage. The deep fat fryers are equipped with overheating protection and an oil drainage valve, which is fitted with the supplied drainage pipe. The deep fat fryers are manufactured in widths of 400 resp. 600 mm and are supplied with one or two frying baskets. The front panel has clear and easily accessible controls. The sides of the range are smooth and easy-to-clean. The deep fat fryers are connected to the mains supply at the rear. The deep fat fryers can be positioned with the back directly against a fireproof bulkhead. A stainless steel floor cabinet with doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. Stainless Steel Construction Thermostat Controlled With Overheating Protection Hygienic Design Two Sizes Solas Certified

The deep fat fryers are made of stainless steel. The top has raised edges on three sides to collect any spillage. The deep fat fryers are equipped with overheating protection and an oil drainage valve, which is fitted with the supplied drainage pipe. The deep fat fryers are manufactured in widths of 400 resp. 600 mm and are supplied with one or two frying baskets. The front panel has clear and easily accessible controls. The sides of the range are smooth and easy-to-clean. The deep fat fryers are connected to the mains supply at the rear. The deep fat fryers can be positioned with the back directly against a fireproof bulkhead. A stainless steel floor cabinet with doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. Stainless Steel Construction Thermostat Controlled With Overheating Protection Hygienic Design Two Sizes Solas Certified

This hot plate is intended for countertop use, equipped with a thermostatic system which gives a fine and infinitely variable temperature selection. It is supplied with a rolling rack, easy to use front mounted control knob with built-in pilot lamps. Simple function Stepless power control Overheating protection White enamelled Equipped with a rolling rack

Induction cookers are small appliances with one heating zone that can be set up on the table during meals. They also serve as additional appliances in the kitchen and are particularly well-suited for boiling, frying, braising, heating and cooking a wide range of dishes. The appliances are portable and connected with an electric wire to a nearby socket. The heating zone consists of a glass ceramic plate, or a bowl respectively, which is fitted firmly and without joints into the stainless steel case. The even glass ceramic plate has pots and pans with even bottoms placed on it. The appliance with a bowl is to hold a wok pan. The wok pan is a part of the delivery. To secure optimal cooking results, the shape and material of the wok pan must fit the concerned induction cooker. Induction heating Stainless steel High performance Ideal for exotic foods Perfect for show cooking in front of the guests Clean pleasant work without heat emission Energy saving

Table top model with one cooking zone. This unit has touch button controls and digital power level display. The automatic pan detection function will improve the energy efficiency. Heavy duty AISI 304 stainless steel construction with sealed glass-ceramic cooking surface. The surfaces are easy to clean with rounded edges and flush fit between units. Table top design, single zone model. Heavy duty AISI 304 Stainless steel construction. Sealed heavy duty glass-ceramic cooking surface, 4 mm in thickness. Digital power level display (from 1 to 12). Automatic pan detection to transfer power only when pan is present. Rapid heat transfer directly to the pan, no heat is dispersed into the environment. 4 adjustable feet. Suitable for pot and pan with diameter of 140- 250mm.

Tabletop design, side-by-side model. Heavy duty 304 AISI stainless steel construction. High impact, heavy duty glass ceramic cooking surface for durability and easy cleaning. Two induction cooking zones (1,8kW each) with independent touch button controls. Automatic pan detection transfers power only when the pan is present, maximizing energy efficiency. No heat emission into the work environment only to the magnetic induction pans. Smooth rounded edges guarantee a flush fit between units. Digital power level display and touch button control panel. IP24 protection. Cord and plug included. Table top design, side by side model. Heavy duty AISI 304 Stainless steel construction. Sealed heavy duty glass-ceramic cooking surface, 4 mm in thickness. Two independently controlled induction cooking zones with touch button control panel. Digital power level display. Automatic pan detection to transfer power only when pan is present. Rapid heat transfer directly to the pan, no heat is dispersed into the environment. 4 adjustable feet. Suitable for pot and pan with diameter of 140-250 mm.

Tabletop design, front-to-back model. Heavy duty 304 AISI stainless steel construction. High impact, heavy duty glass ceramic cooking surface for durability and easy cleaning. Two induction cooking zones (1,8kW each) with independent touch button controls. Automatic pan detection transfers power only when the pan is present, maximizing energy efficiency. No heat emission into the work environment only to the magnetic induction pans. Smooth rounded edges guarantee a flush fit between units. Digital power level display and touch button control panel. IP24 protection. Cord and plug included. Table top design, front-to-back model. Sealed heavy duty glass-ceramic cooking surface, 4 mm in thickness. Two independently controlled induction cooking zones with touch button control panel. Digital power level display. Automatic pan detection to transfer power only when pan is present. Rapid heat transfer directly to the pan, no heat is dispersed into the environment. 4 adjustable feet. Suitable for pot and pan with diameter of 140-250 mm.

The XP 700 range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. The freestanding electric fryer is ideal for kitchens needing a versatile, efficient and easy to clean unit capable of cooking numerous portions time after time. The fryer has high efficiency liftable incoloy armoured heating elements placed inside the deep drawn well. Well with rounded corners for ease of cleaning. Right-angled side edges to allow flush-fitting joints between units, eliminating gaps and possible dirt traps. One piece pressed 1.5 mm worktop in Stainless steel. All exterior panels in Stainless Steel with Scotch Brite finishing. The oil drains through a tap into a drainage container positioned under the well and all major compartments located in front of unit or ease of maintenance. Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management. IPX 4 water protection. Overheat protection thermostat Thermostatic regulation of oil temperature up to a maximum of 185 °C Liftable incoloy armoured heating elements

The XP 900 range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. The freestanding electric fryer is ideal for kitchens needing a versatile, efficient and easy to clean unit capable of cooking numerous portions time after time. The fryer has high efficiency liftable incoloy armoured heating elements placed inside the deep drawn well. Well with rounded corners for ease of cleaning. Right-angled side edges to allow flush-fitting joints between units, eliminating gaps and possible dirt traps. One piece pressed 1.5 mm worktop in Stainless steel. All exterior panels in Stainless Steel with Scotch Brite finishing. The oil drains through a tap into a drainage container positioned under the well and all major compartments located in front of unit or ease of maintenance. Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management. IPX 5 water protection. Overheat protection thermostat Thermostatic regulation of oil temperature up to a maximum of 185 °C Liftable incoloy armoured heating elements

This fryer is made entirely in stainless steel with very strong, 1.5 mm thick, seamless, pressed stainless steel oil tank. It is tested to satisfy the heavy use and demanding safety standards required at sea. The fryer is provided with an improved security system thanks to the deactivation of the fryer when opening the tap and when washing the heating element. The rounded edges and corners, and the hinged construction of the stainless steel heating elements facilitate cleaning. The drain with a cold zone for waste recovery is located in the cabinet and provided with a ball type drain valve with a security lock. The thermostat probe is fixed to the heating element which means quick response and precise temperature control. Using a "standby mode" reduces automatically oil temperature saving both oil and electricity. As to Solas rules the client can choose to use the connection points directly in the unit or use the separate 4-wire Solas security cord delivered with the machine. An automatic basket lift and a recycling pump with micro-filter are available as optional extras. High Output Exelent Frying Results Energy And Oil Saving Insulated Execution Precise Temperature Control Easy To Clean Protection Class Ipx5 Manufactured Acc. To Solas Recommendations

The XP 700 range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. The freestanding electric fryer is ideal for kitchens needing a versatile, efficient and easy to clean unit capable of cooking numerous portions time after time. The fryer has high efficiency liftable incoloy armoured heating elements placed inside the deep drawn well. Well with rounded corners for ease of cleaning. Right-angled side edges to allow flush-fitting joints between units, eliminating gaps and possible dirt traps. One piece pressed 1.5 mm worktop in Stainless steel. All exterior panels in Stainless Steel with Scotch Brite finishing. The oil drains through a tap into a drainage container positioned under the well and all major compartments located in front of unit or ease of maintenance. Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management. IPX 4 water protection. Overheat protection thermostat Thermostatic regulation of oil temperature up to a maximum of 185 °C Liftable incoloy armoured heating elements

The MFEX24-20 Deep fat fryer is manufactured to comply with the Consolidated edition 2009 of International Convention for the Safety of Life at Sea (SOLAS), chapter II-2, regulation 10, paragraph 6.4. The model includes an electric deep fryer and a fire extinguishing system, integrated by a stainless steel casing with an exhaust hood and exhaust blower. MFEX applies a wet chemical extinguishing system. The chemical cylinder and control assembly are accommodated in the right side of the lower casing. MFEX can be installed under a standard cooking exhaust hood, or directly connected to cooking main ventilation duct. High power density, quick temperature recovery for desired frying quality Submerged heating elemtns brings optimal energy transfer With deep cold-oil zone, improves frying quality, brings extended shortening life SUS304 stainless steel internal and external Protection grade IP44 Complying with SOLAS and ISO15731 Automatic and manual release An environment-friendly extinguishing agent with long preservation life Unique external-power cut-off design and external-powered remote alarm panel enhance electrical safety in case of fire Main parts accessible from the front

The MFEX24-20 Deep fat fryer is manufactured to comply with the Consolidated edition 2009 of International Convention for the Safety of Life at Sea (SOLAS), chapter II-2, regulation 10, paragraph 6.4. The model includes an electric deep fryer and a fire extinguishing system, integrated by a stainless steel casing with an exhaust hood and exhaust blower, tested following ISO standard 15371:2009. MFEX applies a wet chemical extinguishing system. The chemical cylinder and control assembly are accommodated in the right side of the lower casing. MFEX can be installed under a standard cooking exhaust hood, or directly connected to cooking main ventilation duct. High power density, quick temperature recovery for desired frying quality Submerged heating brings optimal energy transfer With deep cold-oil zone, improves frying quality, brings extended shortening life SUS304 stainless steel internal and external Protection grade IP44 Complying with SOLAS and ISO15731 test standard Automatic and manual release An environment-friendly extinguishing agent with long preservation life Unique external-power cut-off design and external-powered remote alarm panel enhance electrical safety when in fire

This fryer is made entirely in stainless steel with very strong, 1.5 mm thick, seamless, pressed stainless steel oil tank. It is tested to satisfy the heavy use and demanding safety standards required at sea. The fryer is provided with an improved security system thanks to the deactivation of the fryer when opening the tap and when washing the heating element. The rounded edges and corners, and the hinged construction of the stainless steel heating elements facilitate cleaning. The drain with a cold zone for waste recovery is located in the cabinet and provided with a ball type drain valve with a security lock. The thermostat probe is fixed to the heating element which means quick response and precise temperature control. Using a "standby mode" reduces automatically oil temperature saving both oil and electricity. As to Solas rules the client can choose to use the connection points directly in the unit or use the separate 4-wire Solas security cord delivered with the machine. An automatic basket lift and a recycling pump with micro-filter are available as optional extras. High Output Exelent Frying Results Energy And Oil Saving Insulated Execution Precise Temperature Control Easy To Clean Protection Class Ipx5 Manufactured Acc. To Solas Recommendations

This fryer is made entirely in stainless steel with very strong, 1.5 mm thick, seamless, pressed stainless steel oil tank. It is tested to satisfy the heavy use and demanding safety standards required at sea. The fryer is provided with an improved security system thanks to the deactivation of the fryer when opening the tap and when washing the heating element. The rounded edges and corners, and the hinged construction of the stainless steel heating elements facilitate cleaning. The drain with a cold zone for waste recovery is located in the cabinet and provided with a ball type drain valve with a security lock. The thermostat probe is fixed to the heating element which means quick response and precise temperature control. Using a "standby mode" reduces automatically oil temperature saving both oil and electricity. As to Solas rules the client can choose to use the connection points directly in the unit or use the separate 4-wire Solas security cord delivered with the machine. An automatic basket lift and a recycling pump with micro-filter are available as optional extras. High Output Exelent Frying Results Energy And Oil Saving Insulated Execution Precise Temperature Control Easy To Clean Protection Class Ipx5 Manufactured Acc. To Solas Recommendations

Deep drawn V-shaped well with external heating elements to facilitate cleaning operations. Indirect oil heatingsystem and uniform heat distribution for extended oil life. Electronic sensor for precise oil temperature control. Reduced power setting to melt solid fat. Oil can be easily drained via a ball-valve. All major components may be easily accessed from the front. THERMODUL connection system creates a seamless work top when units are connected to each other thus avoiding soil penetrating vital components and facilitating the removal of units incase of replacement or service. Metal knobs with embedded hygienic silicon “soft”grip for easier handling and cleaning. The special design of the controls prevent infiltration of liquids or soil into vital components. Overheat protection: a temperature sensor switches off the supply in case of overheating. Large visible digital display manufactured in tempered glass to resist heat and chemicals, showing temperatures or power settings. The display also shows on/off status of the applianceand on/off status of the heating elements. Standby function for energy saving and fast recovery of maximum power. Raised edge all around the well to protect from infiltration of dirt from worktop. Large overflow stamped area, located around the well.

This fryer is made entirely in stainless steel with very strong, 1.5 mm thick, seamless, pressed stainless steel oil tank. It is tested to satisfy the heavy use and demanding safety standards required at sea. The fryer is provided with an improved security system thanks to the deactivation of the fryer when opening the tap and when washing the heating element. The rounded edges and corners, and the hinged construction of the stainless steel heating elements facilitate cleaning. The drain with a cold zone for waste recovery is located in the cabinet and provided with a ball type drain valve with a security lock. The thermostat probe is fixed to the heating element which means quick response and precise temperature control. Using a "standby mode" reduces automatically oil temperature saving both oil and electricity. As to Solas rules the client can choose to use the connection points directly in the unit or use the separate 4-wire Solas security cord delivered with the machine. An automatic basket lift and a recycling pump with micro-filter are available as optional extras. High Output Exelent Frying Results Energy And Oil Saving Insulated Execution Precise Temperature Control Easy To Clean Protection Class Ipx5 Manufactured Acc. To Solas Recommendations

This hot plate is intended for countertop use, equipped with a thermostatic system which gives a fine and infinitely variable temperature selection. It is supplied with a rolling rack, easy to use front mounted control knob with built-in pilot lamps. · Simple function · Stepless power control · Overheating protection · White enameled · Equipped with a rolling rack#

The griddles/grills are manufactured in three widths with tops in three designs - smooth, ribbed or smooth/ribbed tops of steel or chrome steel. The tops have raised edges and a fat drainage hole for excessive fat that collects in a fat tray which is emptied from the front. The griddles/grills are made of stainless steel. The front panel has clear and easily accessible controls. The sides of the griddles/grills are smooth and easy-to-clean. The griddles/grills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The griddles/grills can be positioned with the rear directly against a fireproof wall. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Three Sizes

Induction cookers are small appliances with one heating zone that could be set up on the table during meals. They also serve as additional appliances in the kitchen and are particularly well-suited for boiling, frying, braising, heating and cooking a wide range of dishes. The appliances are portable and connected with an electric wire to a nearby socket. The heating zone consists of a glass ceramic plate, or a bowl respectively, which is fitted firmly and without joints into the stainless steel case. The even glass ceramic plate has pots and pans with even bottoms placed on it. The appliance with a bowl is to hold a wok pan. The wok pan is a part of the delivery. To secure optimal cooking results, the shape and material of the wok pan must fit the concerned induction cooker. Induction heating Stainless steel High performance Ideal for exotic foods Perfect for show cooking in front of the guests Clean pleasant work without heat emission Energy saving

The C100MA is a roll-in rotating rack oven with compact design and high capacity. It is a quiet, energy-efficient and compact oven with high flexibility and designed to fit into small spaces. The rack oven has a max baking temperature of 300°C and bakes even all over the rack creating the perfect baking result. It has integrated high capacity steam system that gives a smooth, crisp crust and for some bread a significantly increased volume. This model has room for one rack and the oven’s smart control panel, and well-conceived design makes it very user-friendly. It has automatic rotation stop, which facilitates unloading, as the rack is always correctly positioned to the door when the oven is open. The spring-loaded door hinges keep the door open during loading and unloading. Separable and replaceable drainage box makes it possible to change the drainage from the front to the back of the oven. The right-hand hinged insulated door has double glazed window and doorstop. Heating package integrated into the top section –Requires a smaller floor space. Suspension hook is included in the delivery. Equipped with the Increased Baking Surface (IBS) Built to comply with USPH SD Touch II Panel User-friendly touch panel with a high-resolution screen Efficient insulation -retains the heat inside the oven Strong, stainless steel interior och exterior Integrated high capacity steam system Easy to open High efficiency, low heating cost

The electric rice cooker is a powerful and full featured rice cooker designed and built for commercial use. With cook and heat preservation functions this model offers automatic shut-off and hold when done. Press the switch button and the red pilot lamp that lets you know the unit is cooking. The cooker is provided with a magnetic thermal limiter located in the middle of the heater plate for better cooking control. It senses when the water has been absorbed, ending the cooking cycle before the rice can burn. When the rice is finished the switch button is automatically released and the pilot lamp will turn to yellow. Keep the lid on for 10 more minutes to be sure that the rice is thoroughly cooked. The temperature of the rice will be automatically kept within the range of 60-80 °C. When the temperature of the rice has fallen below that point the pilot lamp will begin to flash indicating that the heat preservation unit has been set to work. The rice cooker is delivered including a measuring cup and a rice scoop and provided with a 1.3 m long electrical cord with earthed plug. High output Exelent frying results Energy and oil saving Insulated execution Precise temperature control Six sizes Easy to clean Protection class ipx5 Manufactured acc. to Solas recommendations

These electric automatic rice cookers with cooking capacity of 3 - 22.5 kgs are powerful and full-featured cookers designed and built for commercial use. The cooker has an exterior of stainless steel sheet, completely insulated with 25 mm thick glass-wool. The interior is made of aluminum- plated steel. The door is insulated with 25 mm thick glass-wool and provided with a heat resistant handle. The cooker with highly efficient, powerful element is equipped with a thermistor. The thermistor uses steam-catching method to sense the preset temperature of steam coming from the pan and automatically turns the heater of instantly. A cooking adjusting switch provides fine condition adjustment to cooking to obtain rice of the desired quality. A buzzer sounds after 15 minutes of steaming, at the end of the cooking cycle, indicate that the rice is ready to eat. The cooker is equipped with a drawer type rice pan which can be pulled out smoothly without having to put one’s hand into the hot area. A round aluminum-finish rice pan complete with lid is delivered with each deck of the cooker. Stainless Steel Exterior Fast and Reliable Powerful Rice Settling Indication Precise Steam Temperature Control Functional Safety Drawer Three Sizes Easy to Maintain

These electric automatic rice cookers with cooking capacity of 3 - 22.5 kgs are powerful and full-featured cookers designed and built for commercial use. The cooker has an exterior of stainless steel sheet, completely insulated with 25 mm thick glass-wool. The interior is made of aluminum- plated steel. The door is insulated with 25 mm thick glass-wool and provided with a heat resistant handle. The cooker with highly efficient, powerful element is equipped with a thermistor. The thermistor uses steam-catching method to sense the preset temperature of steam coming from the pan and automatically turns the heater of instantly. A cooking adjusting switch provides fine condition adjustment to cooking to obtain rice of the desired quality. A buzzer sounds after 15 minutes of steaming, at the end of the cooking cycle, indicate that the rice is ready to eat. The cooker is equipped with a drawer type rice pan which can be pulled out smoothly without having to put one’s hand into the hot area. A round aluminum-finish rice pan complete with lid is delivered with each deck of the cooker. Stainless Steel Exterior Fast and Reliable Powerful Rice Settling Indication Precise Steam Temperature Control Functional Safety Drawer Three Sizes Easy to Maintain

These electric automatic rice cookers with cooking capacity of 3 - 22.5 kgs are powerful and full-featured cookers designed and built for commercial use. The cooker has an exterior of stainless steel sheet, completely insulated with 25 mm thick glass-wool. The interior is made of aluminum- plated steel. The door is insulated with 25 mm thick glass-wool and provided with a heat resistant handle. The cooker with highly efficient, powerful element is equipped with a thermistor. The thermistor uses steam-catching method to sense the preset temperature of steam coming from the pan and automatically turns the heater of instantly. A cooking adjusting switch provides fine condition adjustment to cooking to obtain rice of the desired quality. A buzzer sounds after 15 minutes of steaming, at the end of the cooking cycle, indicate that the rice is ready to eat. The cooker is equipped with a drawer type rice pan which can be pulled out smoothly without having to put one’s hand into the hot area. A round aluminum-finish rice pan complete with lid is delivered with each deck of the cooker. Stainless Steel Exterior Fast and Reliable Powerful Rice Settling Indication Precise Steam Temperature Control Functional Safety Drawer Three Sizes Easy to Maintain

The 700XP range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. This freestanding electric range is ideal for kitchens needing a flexible, powerful and easy to clean cooking top mounted on an electric oven. Six hermetically sealed 2.6kW cast-iron plates on a one-piece pressed 1.5 mm stainless steel worktop. Exterior panels are in stainless steel with Scotch Brite finish. The oven has a recessed, double skinned, insulated door for air-tight closure and better hygiene. The cavity is in stainless steel with a vitreous enamelled ribbed base plate to allow direct placement of pans. Three levels of runners to accommodate 2/1GN shelves. Separate thermostats for the top and bottom elements adjustable from 140° to 300°C and power of 6 kW. Main connections are accessible from below the base of the unit and all components from the front. The range has marine feet in stainless steel, adjustable up to 50mm in height. Four 2.6kW cast-iron square plates are hermetically sealed to the one-piece top. Stainless steel oven chamber with 3 levels of runners for 2/1 GN shelves (2 steam pans). Ribbed enamelled steel oven base plate. Oven thermostat adjustable from 140 °C to 300 °C. IPX 4 water protection. All exterior panels in Stainless Steel

The hydraulically adjustable range is made entirely in stainless steel with semi-polished Scotch Brite finish. It is equipped with 6 cooking plates made of cast iron controlled by 3-step switches. Control switches and pilot lamps indicating their actions are located on the front panel. Hot plates are carefully mounted and balanced to form a completely flat hob surface. Large pots and pans can be placed over several hotplates at the same time providing full contact. The range is provided with hydraulically adjustable telescopic legs making it possible to adjust the height between 756-968 mm. The legs are equipped with marine feet for bolting or welding to the deck. Installation and service are carried out at the front of the range. Stainless steel execution Hygienic design Hydraulically adjustable height Powerful with high capacity Removable drip pan Ip54 water protection class Easy to maintain

Range with six cast-iron 40x40cm hotplates carefully mounted and balanced to form a completely flat surface. A large pan can be placed over several hotplates at the same time providing full contact. The range is easy to use and clean. It is a safe and effective cooker with a high heating effect for rapid warming. The FKP cookers are renowned within the Scandinavian catering services for their robust design and top quality sturdy hotplates that allow long periods of use. All in stainless steel construction. Hygienic Fixed 3,8kW per hotplate Removable drip pan Bottom shelf Easy-to-service

Capacity: 16 trays 457x762 mm

Electric Salamander, open on three sides for rapid cooling and ease of use. Cooking plate size is 600 x 350 mm, accept GN 1/1. The model features heat control with energy regulator and two independent tilting incoloy armoured heating elements. These elements can be tilted for easy cleaning under the moving deck. Tabletop unit has four rubber feet but can be wall-mounted with dedicated optional accessory. Made of AISI 304 stainless steel Air vents along the upper side for evacuating heat and smoke Removable stainless steel drip tray Movable upper plate Chromium-plated steel grid with a safety stop to avoid accidental fall

The Dito Electrolux Libero Line offers a complete package of plug-in appliances suitable for every food service location to cook, fry, grill and chill all kinds of dishes in a quick and easy way. In a very compact space with this versatile induction wok you can heat up and start cooking all kinds of stir fry food, Asian style dishes and more. Heavy-duty, one-piece seamless, 304 AISI stainless steel construction High impact, heavy duty glass-ceramic wok bowl Fits Induction Ready Wok Pan Automatic pan detection No heat emission into the work environment Smooth rounded edges guarantee a flush fit between units Digital power level display and touch button control panel IPX 4 water protection Cord and plug included Tabletop design, single zone model

These heavy-duty toasters of conveyor type are made of stainless steel and have a smooth surfaced exterior in a polished finish. The reliable motor and gear unit in combination with a heavy duty chain means a trouble-free and smooth carrier rotation. Metal sheathed long-life heating elements and carefully designed, heated toast storage area secure a high capacity. The precisely controlled heating and the variable conveyor speed device offer a perfect toasting result of any sliced bread. The toaster of a horizontal type with electronically controlled heating elements allows front or rear discharge and is equipped with a toast collector pan, removable feed ramp and crumb tray. A 1.8 m cord with plug is also included in the supply. Heavy-duty, reliable construction Horizontal type Stainless steel High capacity Electronic control For long life use Perfect toasting

These heavy duty toasters of conveyor type are made of stainless steel and have a smooth surfaced exterior in a polished finish. The reliable motor and gear unit in combination with a heavy duty chain mean a trouble free and smooth carrier rotation. Metal sheathed long-life heating elements and carefully designed, heated toast storage area secure a high capacity. The precisely controlled heating and the step less variable conveyor speed device offer a perfect toasting result of any sliced bread. The toasters of vertical type with thermostatically controlled heating have three removable loading baskets and manual advance, which allows rotation of the conveyor and baskets without energizing the toaster. For further specifications of the models, please see overleaf. Heavy Duty, Reliable Contruction Vertical Type Stainless Steel High Capacity Thermostat Control For Long Life Use Perfect Toasting

These heavy duty toasters of conveyor type are made of stainless steel and have a smooth surfaced exterior in a polished finish. The reliable motor and gear unit in combination with a heavy duty chain mean a trouble free and smooth carrier rotation. Metal sheathed long-life heating elements and carefully designed, heated toast storage area secure a high capacity. The precisely controlled heating and the step less variable conveyor speed device offer a perfect toasting result of any sliced bread. The toasters of vertical type with thermostatically controlled heating have three removable loading baskets and manual advance, which allows rotation of the conveyor and baskets without energizing the toaster. For further specifications of the models, please see overleaf. Heavy Duty, Reliable Construction Vertical Type Stainless Steel High Capacity Thermostat Control For Long Life Use Perfect Toasting

The LTX6 four-slot toaster comes with an innovative "scissor" lift action that allows the toast to be lifted and removed without jamming. The slot size is 20x14 mm, and the number of slots required can be controlled with a switch to save energy. The toaster has a stainless steel finish, a removable crumb tray and a mechanical timer. Six slots Slots size is 20x140 mm Mechanical timer

The LTX4 four-slot toaster comes with an innovative "scissor" lift action that allows the toast to be lifted and removed without jamming. The slot size is 20x14 mm, and the number of slots required can be controlled with a switch to save energy. The toaster has a stainless steel finish, a removable crumb tray and a mechanical timer. Four slots Slots size is 20x140 mm Mechanical timer

This automatic toaster is equipped with well protected heating elements of a long-life type and balanced toast chamber for perfect and even browning. The outer housing is made of brushed stainless steel with heat insulated long sides. “Thick and thin function” means that he metal grids are automatically adjusted to the size of the bread so that the bread slices get evenly toasted. An electronic timer with six settings of toasting provide consistent toasting at just the level you prefer. The toaster is provided with a stop button which allows to stop the toasting action at any time for convenience and safety. “High rise function” makes it easier to grab the bread from the toaster when it is ready. An extensible crumb tray in the bottom makes it easy to remove crumbs from the toaster. The toaster is delivered with an earthed 0,65 m electric cord with plug. Adjustable setting 1-6 Removable crumb tray High rise function Stop function Domestic model

SpeeDelight is the new professional solution for businesses on the move: it's a dual-plate appliance with the first and only combination of three direct and indirect cooking technologies. Serve delicious food fast: more than a snack; it's a complete taste experience. The grill can be used to heat up and re-generate food such as; paninis, bagels, toasts, pizzas, quiches and many more. The three cooking technologies contact, infrared radiation and microwaves provide perfectly cooked food heated to the core. The snacks are perfectly crispy outside and cooked just right inside. The plate settles with just the right pressure and opens automatically when your snack is ready. All guesswork is gone: the result is exactly what's on your menu, every time. Flexible Top Plate 3 cooking technologies: contact, infrared radiation and microwave Energy Saving Mode 8 programs that can be adjusted by the user Automatic lifting of the lid at the end of the cooking cycle Electronic control with digital 4.3'' LED display Ergonomic handle

Freestanding premium cooking range with a solid top made of smooth, pore-free, steel. Four independently controlled heating zones with two electronic sensors per zone and eight power levels. Rapid plate heat-up, continuously ready to use. Overheat protection switches off the supply in case of overheating. Standby function saves energy and quickly recovers maximum power. THERMODUL connection system creates a seamless worktop when units are connected, thus avoiding soil penetrating vital components and facilitating the removal of units in case of replacement or service. The design of the controls prevents infiltration and have embedded hygienic silicone "soft" grip for easier handling and cleaning. The model is fitted with a large visible digital display manufactured in tempered glass to resist heat and chemicals, showing temperatures or power settings. The display also shows on/off status of the appliance and the heating elements. 4 heating zones independently controlled. Rapid heat-up of the plate and continuously ready for use. Overheat protection Pans can easily be moved from one area to another without lifting. Solid top cooking surface made of 20 mm thick steel, DIN 1.7335, smooth pore-free and easy to clean. Wide rounded cleaning zone around the plates. IPX5 water resistance certification. All major components are accessible from the front. Standby function for energy saving Cooking plate and base joint profile Two electronic sensors per zone to control surface. 8 power levels.

The 900XP range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. This range has four 4 kW square cast-iron hot plates hermetically sealed to a one-piece top. The range has an oven chamber with three levels of runners to accommodate 2/1 GN shelves (2 steam pans). Ribbed, cast-iron oven base plate. Exterior panels of the unit in stainless steel with Scotch Brite finish. Pan supports in heavy duty cast iron. Extra strength worktop in heavy duty 2 mm stainless steel. Right-angled side edges to allow flush-fitting junction between units. IPX5 water protection The design of the control knob system guarantees against water infiltration Two hermetically sealed 4kW cast-iron plates AISI 304 stainless steel worktop, 2mm thick All exterior panels in Stainless Steel with Scotch Brite finishing Model is 930 mm deep to give a larger working surface area Oven chamber with three levels of runners to accommodate 2/1 GN shelves Thermostat temperature adjustable from 110°C to 285°C.

The 700XP range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. This freestanding electric range is ideal for kitchens needing a flexible, powerful and easy to clean cooking top mounted on an electric oven. Four hermetically sealed 2.6kW cast-iron plates on a one-piece pressed 1.5 mm stainless steel worktop. Exterior panels are in stainless steel with Scotch Brite finish. The oven has a recessed, double skinned, insulated door for air-tight closure and better hygiene. The cavity is in stainless steel with a vitreous enamelled ribbed base plate to allow direct placement of pans. Three levels of runners to accommodate 2/1GN shelves. Separate thermostats for the top and bottom elements adjustable from 140° to 300°C and power of 6 kW. Main connections are accessible from below the base of the unit and all components from the front. The range has marine feet in stainless steel, adjustable up to 50mm in height. Four 2.6kW cast-iron round plates are hermetically sealed to the one-piece top. Stainless steel oven chamber with 3 levels of runners for 2/1 GN shelves (2 steam pans). Ribbed enamelled steel oven base plate. Oven thermostat adjustable from 140 °C to 300 °C. IPX 4 water protection. All exterior panels in Stainless Steel

S/steel oven. Cavity dim. 330x381x216mm. Usable cavity space: 28 litres. 11 power levels and 100 memory settings. Approved by: NSF, UL and CSA. Constructed to withstand the foodservice environment. A unique method of energy distribution provides superior even heating throughout the cavity. With a double rotating antenna and up to 100 programmable menu items simplifies cooking and ensures consistent results. And four stage cooking option with one-touch programming. This reduces preparation time, labour and food waste while providing consistent results. The microwave has 11 power levels for consistent, delicious results for frozen, refrigerated and fresh foods - from the freezer to table in minutes. Multiple quantity pad calculates the proper cook times for up to 8 items. The controls are user-friendly and require minimal training. See-through door and lighted interior for monitoring without opening the door. A capacity of 28 litres accommodates two standard 4" (102mm) deep half-sized pans. Stackable to save valuable counter space. Interior ceramic shelf is sealed and recessed to reduce plate-to-shelf edge impact and keep spills contained. Removable, cleanable air filter and clean filter reminder protect oven components. Automatic voltage sensor for easy installation. Standard supply includes a 1.5 m electrical grounded cord. Stainless Steel Interior And Exterior Uniform Heating Ultimate Timer Digital Display And Touch Control 11 Power Levels Window And Interior Light Easy To Clean

S/Steel Oven. Dim. 331x305x175mm. Usable cavity space: 17L. 11 power levels. Approved by: NSF, UL and CSA.. Dim. 425x564x335mm. Stainless Steel Construction Uniform Heating Digital Display With Timer Touch Control 11 Power Levels See-Through Window Interior Light Stackable Models Removable Filter With Reminder Easy To Clean

The commercial microwave oven MWP1050-30M is the ideal oven for light volume sites and self-serve locations. The durable construction means reliable and long life use. The stainless steel interior and exterior with smooth surfaces facilitate cleaning. The microwave oven with a capacity of 30 litres easily accommodates prepackaged foods, single serving or up to 330 mm platter. The 5 power level possibilities provide flexibility for heating of food items from frozen to fresh. The oven is easy to handle with rotary knobs for setting the power and time. The see-through door and lighted interior make possible to see clearly what is happening inside the oven during the operation without opening the door. Standard supply includes 1.0 m cable with a grounded plug. Stainless Steel Interior And Exterior 5 Power Levels Defrost Function Easy-To-Use 10 Minute Dial Timer Rotating Antenna Interior Light

For filtering tepid oil into the well of EVO-models, Deep Fat Fryers. Extra replacement polyester microfilter is available as an optional extra.

Replacement polyester microfilter for 6444.

This infrared food warmer keeps all food at the proper serving temperatures using Glo-Ray's pre-focused heat patterns. This pattern prevents foods from being overcooked in the middle and cooling off around the edges by concentrating higher temperatures to the outer edges of holding surfaces where heat loss is the greatest. The food warmer ensures maximum flavour and minimises the risk of food-borne illness. Foods do not dry out or become discoloured; even the most delicate dishes hold that "just prepared" look. The housing of stainless steel is durable and eliminates the danger of sagging. The food warmer is delivered factory-assembled, ready to install. It can be installed side by side to create a warming area of any length. A pair of marine brackets for installation is included in delivery. Sturdy stainless steel housing Pre-focused heat Metal sheathed elements Easy to install

This hot plate is intended to keep food hot and is a suitable complement to the standard equipment. It can be placed on top of a counter, service table etc. or recessed. The hot plate is made of polished stainless steel (18/10). A lamp built into power switch indicates that the heating plate is connected to the mains supply and that the heating plate is heating up. The temperature is thermostatically controlled up to 90 °C. The unit is equipped with feet of insulating material. Easy to clean Stainless steel Adjustable thermostatically controlled heating

The chargrills are made of stainless steel. The cook-top has raised edges on three sides to collect any spillage. The large model has two separately controlled heating zones. The grids are easy removable. The sides of the chargrills are smooth and easy-to-clean. The chargrills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The chargrills can be positioned with the rear directly against a fireproof bulkhead. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Two Sizes

This powerful microwave oven is designed for use in the most demanding foodservice locations. The compact, rugged construction with a few moving parts; the door with solid die-cast handle and transparent window, recessed and sealed single board controls means durability and reliability, long life use. The unique method of energy distribution with rotating antenna provides superior even-heating. The casing and oven interior with lighting made in stainless steel with smooth surfaces mean facilitated cleaning. The microwave ovens offer a programmable selection of up to 100 of your most popular menu items. Buttons can be preset by power level and time for fast, consistent operation. An X2 multiple button simplifies operation and training and improves product consistency when preparing more than one order at a time. The ovens with 11 power level possibilities – from full power to hold – provide maximum flexibility for heating a wide variety of food items from frozen to fresh. Standard supply includes a 1.7 m electrical earthed cord. Stainless Steel Construction Uniform Heating Digital Display With Timer Touch Control 11 Power Levels See-Through Window Interior Light Stackable Models Removable Filter Easy To Clean

S/steel oven. Dim. 331x305x175mm. Usable cavity space: 17 litres. 11 power levels. Approved by: NSF UL and CSA. Stainless Steel Construction Uniform Heating Digital Display With Timer Touch Control 11 Power Levels See-Through Window Interior Light Stackable Models Removable Filter With Reminder With Automatic Voltage Sensor Easy To Clean

The 700XP range is designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. The freestanding electric range and boiling tops are ideal for kitchens needing a flexible, powerful and easy to clean cooking top mounted on an electric oven Main connections are accessible from below the base of the unit. Access to all components from the front. One piece pressed worktop in 1,5mm stainless steel with smooth, rounded corners. Exterior panels in stainless steel with Scotch Brite finish. Provided with recessed, double skinned, insulated door for air-tight closure and better hygiene. Oven cavity in stainless steel with a vitreous enamelled ribbed base plate to allow for the direct placement of pans. Marine feet in stainless steel are adjustable up to 50mm in height. This unit has separate thermostats for the top and bottom elements. Oven thermostat adjustable from 140° to 300°C and power of 6 kW. Stainless steel oven chamber with 3 levels of runners to accommodate 2/1GN shelves. Cast-iron hot plates each having a power of 2.6 kW with regulation in steps and safety thermostat is hermetically sealed to the one-piece top. Four 2.6kW cast-iron square plates are hermetically sealed to the one-piece top. Stainless steel oven chamber with 3 levels of runners for 2/1 GN shelves (2 steam pans). Ribbed enamelled steel oven base plate. Oven thermostat adjustable from 140 °C to 300 °C. IPX 4 water protection. All exterior panels in Stainless Steel

The hydraulically adjustable range is made entirely in stainless steel with semi-polished Scotch Brite finish. It is equipped with 4 cooking plates made of cast iron controlled by 3-step switches. Control switches and pilot lamps indicating their actions are located on the front panel. Hot plates are carefully mounted and balanced to form a completely flat hob surface. Large pots and pans can be placed over several hotplates at the same time providing full contact. The range is provided with hydraulically adjustable telescopic legs making it possible to adjust the height between 756-968 mm. The legs are equipped with marine feet for bolting or welding to the deck. Installation and service are carried out at the front of the range. Stainless steel execution Hygienic design Hydraulically adjustable height Powerful with high capacity Removable drip pan IP54 water protection class Easy to maintain

The range is made entirely in stainless steel with semi-polished Scotch Brite finish. It is equipped with 4 cooking plates made of cast iron controlled by 3-step switches. Control switches and pilot lamps indicating their actions are located on the front panel. Hot plates are carefully mounted and balanced to form a completely flat hob surface. Large pots and pans can be placed over several hotplates at the same time providing full contact. The range is provided with marine feet for bolting or welding to the deck. Installation and service are carried out at the front of the range. Stainless steel execution Hygienic design Powerful with high capacity Removable drip pan IP54 water protection class Easy to maintain

Range with four cast-iron 40x40cm hotplates carefully mounted and balanced to form a completely flat surface. A large pan can be placed over several hotplates at the same time providing full contact. The range is easy to use and clean. It is a safe and effective cooker with a high heating effect for rapid warming. The FKP cookers are renowned within the Scandinavian catering services for their robust design and top quality sturdy hotplates that allow long periods of use. All in stainless steel construction. Hygienic Fixed 3,8kW per hotplate Removable drip pan Bottom shelf Easy-to-service

The range is made entirely in stainless steel with semi-polished Scotch Brite finish. It is equipped with 6 cooking plates made of cast iron controlled by 3-step switches. Control switches and pilot lamps indicating their actions are located on the front panel. Hot plates are carefully mounted and balanced to form a completely flat hob surface. Large pots and pans can be placed over several hotplates at the same time providing full contact. The range is provided with marine feet for bolting or welding to the deck. Installation and service are carried out at the front of the range. Stainless steel execution Hygienic design Powerful with high capacity Removable drip pan IP54 water protection class Easy to maintain

Table top model. Capacity: 3 GN 1/2-040. 4 cooking functions. Dim. 350x530x465 mm. The portable Plug & Cook combi oven is designed for professional use and brings the benefits of convection/steam cooking. This combi oven can be placed on a worktop and plugged into a single-phase electrical socket without any plumbing. The oven is self-contained with built-in freshwater/condense tank and requires no water or drain connections. The water tank is enough for 1-hour use before refilling. The oven cavity of 30 liters has rounded corners and is made of stainless steel. Fan assisted air circulation enables convection cooking at a lower temperature with even results over the three oven shelves or containers size GN 1/2. The control panel is easy to understand all settings are done with four knobs. Combi cooking is faster and at a lower temperature which means low energy consumption. Cooking in the gentle heat of low-temperature steam retains the full flavor and texture of delicate foods. Reheating of chilled food in low-temperature steam preserves its “freshness” without it drying out. Cooking of vegetables in maximum steam preserves their vitamins and flavor. Combining steam and convection heating produces a moist heat that reduces shrinkage whilst still browning meat. All main components are accessible from the front panel. The oven is available with front and back dark blue and delivered with one of each: wire grid GN 1/2, baking plate GN 1/2, perforated and plain container GN 1/2, s/s container GN 1/2-065. In order to increase the capability of the oven an external water tank for 5 hours use before refilling is recommendable. The complete tank kit is available as an optional extra. Modern Design Stainless Steel Oven Cavity With Rounded Corners Front And Back In Dark Blue Plastic 4 Cooking Modes Easy To Maintain

S/steel oven. Cavity dim. 330x381x216mm. Usable cavity space: 28 litres. 10 power levels and 100 memory settings. Approved by: NSF, UL and CSA. Constructed to withstand the foodservice environment. A unique method of energy distribution provides superior even heating throughout the cavity. With a double rotating antenna and up to 100 programmable menu items simplifies cooking and ensures consistent results. And four stage cooking option with one-touch programming. This reduces preparation time, labour and food waste while providing consistent results. The microwave has 11 power levels for consistent, delicious results for frozen, refrigerated and fresh foods - from the freezer to table in minutes. Multiple quantity pad calculates the proper cook times for up to 8 items. The controls are user-friendly and require minimal training. See-through door and lighted interior for monitoring without opening the door. A capacity of 28 litres accommodates two standard 4" (102mm) deep half-sized pans. Stackable to save valuable counter space. Interior ceramic shelf is sealed and recessed to reduce plate-to-shelf edge impact and keep spills contained. Removable, cleanable air filter and clean filter reminder protect oven components. Automatic voltage sensor for easy installation. Standard supply includes a 1.5 m electrical grounded cord. Stainless Steel Interior And Exterior Uniform Heating Ultimate Timer Digital Display And Touch Control 11 Power Levels Window And Interior Light Easy To Clean

S/steel oven. Cavity dim 330x381x216mm. Usable cavity space: 28 litres. 11 power levels and 100 memory settings. Approved by: NSF, UL and CSA. Constructed to withstand the foodservice environment. A unique method of energy distribution provides superior even heating throughout the cavity. With a double rotating antenna and up to 100 programmable menu items simplifies cooking and ensures consistent results. And four stage cooking option with one-touch programming. This reduces preparation time, labour and food waste while providing consistent results. The microwave has 11 power levels for consistent, delicious results for frozen, refrigerated and fresh foods - from the freezer to table in minutes. Multiple quantity pad calculates the proper cook times for up to 8 items. The controls are user-friendly and require minimal training. See-through door and lighted interior for monitoring without opening the door. A capacity of 28 litres accommodates two standard 4" (102mm) deep half-sized pans. Stackable to save valuable counter space. Interior ceramic shelf is sealed and recessed to reduce plate-to-shelf edge impact and keep spills contained. Removable, cleanable air filter and clean filter reminder protect oven components. Automatic voltage sensor for easy installation. Standard supply includes a 1.5 m electrical grounded cord. Stainless Steel Interior And Exterior Uniform Heating Ultimate Timer Digital Display And Touch Control 11 Power Levels Window And Interior Light Easy To Clean

The grill is made of stainless steel. The cook-top has raised edges on three sides to collect any spillage. The large model has two separately controlled heating zones. The grids are easy removable. The sides of the chargrills are smooth and easy-to-clean. The chargrills are connected to the mains supply at the rear using the supplied 1.5 meter cable. The chargrills can be positioned with the rear directly against a fireproof bulkhead. A stainless steel floor cabinet with adjustable legs, doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. For further specifications of the different models and optional extras. Stainless Steel Thermostat Controlled Hygienic Design Two Sizes

The boiling tops has six thermostat controlled hot plates and are made of stainless steel with a galvanised bottom plate. The front panel has clear and easily accessible controls. The cook-top has raised edges on three sides to collect any spillage. The hot plates are integrated directly in the cook-top. The sides of the range are smooth and easy to- clean. The boiling tops are connected to the main supply at the rear using the supplied 1.5-meter cable. The boiling tops can be positioned with the back directly against a fireproof wall. A stainless steel floor cabinet with doors and drawers is also available. The floor cabinet can be fitted with guide racks and grid shelves for Gastro-Norm 1/1. The floor cabinet has adjustable legs. Stainless steel Thermostat controlled Hygienic design 6 round plates

The iCombi Classic works at a consistently high level, thanks to the central measurement and regulatory system for a uniform, individual cooking cabinet climate; the powerful fresh steam generator for optimal steam saturation; the high-performance dehumidification; increased quantity of fan wheels and optimal cooking cabinet design. This combined means energy is transferred to the food with precision and, where appropriate, with a lot of power. The result: large load size with excellent uniform results across all the racks. With up to 10% less energy and water consumption. For the one objective: producing consistently high quality results with crisp crusts, attractive diamond grill patterns, crispy breaded products. The iCombi Classic features an effective steam generator for optimal steam performance even at low temperatures below 100 °C. Individual programming of up to 100 single or multi-level cooking programmes with up to 12 increments. Integrated, maintenance-free grease separation system with no additional grease filter Care system: Automatic cleaning and descaling of steam generator. 4 different cleaning programmes for unsupervised cleaning, even overnight. Effective steam generator Colour display and soft keys Easy to use Effective cleaning Ergonomic door handle Adjustable door stopper

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. This model has two frying zones and two thermostats, making it possible to fry on one side and keep warm on the other. The pan features an electrical control to operate the tilting action. A mounting frame is also available as an optional extra. Electrical tilting Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. Th model also features an electrical control to operate the tilting action. The table is intended for bolting directly to the foundation. A stainless steel mounting frame is available as an optional extra. Sturdy and durable design Height adjustable column Electrical tilting Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. This model has two frying zones and two thermostats, making it possible to fry on one side and keep warm on the other. A reliable handwheel gear mechanism operates the tilting action. The table is intended for bolting directly to the foundation. A stainless steel mounting frame is available as an optional extra. Extra deep (140mm) cooking surface Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. The pan features an electrical control to operate the tilting action. A mounting frame is also available as an optional extra. Extra deep (140mm) cooking surface Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. This model has two frying zones and two thermostats, making it possible to fry on one side and keep warm on the other. A reliable handwheel gear mechanism operates the tilting action. A mounting frame is also available as an optional extra. Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. This model has two frying zones and two thermostats, making it possible to fry on one side and keep warm on the other. A reliable handwheel gear mechanism operates the tilting action. A mounting frame is also available as an optional extra. The table is intended for bolting directly to the foundation. A stainless steel mounting frame is available as an optional extra. Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. This model has two frying zones and two thermostats, making it possible to fry on one side and keep warm on the other. A reliable handwheel gear mechanism operates the tilting action. A mounting frame is also available as an optional extra. Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. A reliable handwheel gear mechanism operates the tilting action. The table is intended for bolting directly to the foundation. A stainless steel mounting frame is available as an optional extra. Sturdy and durable design Height adjustable column Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. A reliable handwheel gear mechanism operates the tilting action. The table is intended for bolting directly to the foundation. A stainless steel mounting frame is available as an optional extra. Sturdy and durable design Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain

The cast-iron frying table is carefully designed for perfect frying results. The casing is thermal-insulated and has a polished stainless steel exterior. Both the column and the counterbalanced lid is entirely made of polished stainless steel, and when the lid is closed, it can be used as an off-loading space or a working surface. This model has two frying zones and two thermostats, making it possible to fry on one side and keep warm on the other. For an excellent heat transfer, the pan features powerful, embedded tubular heating elements which are supported by springs and stainless reflectors. The thermostats are placed in drilled holes in the frying pan to improve heating efficiency. A reliable handwheel gear mechanism operates the tilting action. The table is intended for bolting directly to the foundation. A stainless steel mounting frame is available as an optional extra. Tiltable Sturdy and durable design Cast iron frying surface Stepless heat control Thermal-insulated High capacity Easy to maintain